EERIS: Infra Public Profile

Impedance/Gain-Phase Analyzer with components

CATALOG NAME: 1260A

DESCRIPTION: Impedance/Gain-Phase Analyzer with components: -SOLARTRON 1296A Dielectric Interface -Software Zplot/CorrWare; -Holders: -SOLARTRON 12962A Dielectric Sample Holder -SOLARTRON 12963A Electrode Kit - SOLARTRON 12964A Liquid sample holder The 1260A Impedance/Gain-phase Analyzer is without doubt the most powerful, accurate and flexible frequency response analyzer (FRA) available today. Two or four electrode impedance measurements can be performed in stand-alone mode making the 1260A the ideal choice for general materials characterization. Furthermore, the wide impedance range afforded by the 1260A makes it suitable for a wide range of applications, from highly conducting materials to insulators. Alternatively, when configured with a 1287A Potentiostat, the 1260A Frequency Response Analyzer becomes the most powerful impedance analyzer available to the electrochemist in the world today. Features • AC amplitude range - 0 to 3Vrms • Voltage measurement range 1µV to 3Vrms • Frequency range 10µHz to 32MHz • Frequency resolution 1 in 65,000,000 • Impedance range 10Mohm to 100Mohm • Impedance accuracy 0.1%, 0.1° Applications Control Systems Used stand-alone, the 1260A is routinely used to characterize: • Automated test systems • Power supplies (PSUs) • Aircraft instrumentation/system controls • Aerodynamic tests • Weapons guidance systems • Rocket propulsion and vectoring technology Fuel Cells and Battery Research • Evaluation of membranes/electrocatalysts • Lifetime and performance testing of cells • Corrosion studies • Characterization of cell losses Electrochemistry Stand-alone operation: • Characterization of conducting substrates • Fuel cell and battery research (in conjunction with a load device) The 1260A in conjunction with a 1287A Potentiostat can be used to measure the impedance of 3-electrode, electrochemical cells. Typical applications include: • Corrosion and inhibitor s

PRODUCER: Solartron

PRODUCTION YEAR: 2008

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase) 10.001 € – 50.000 €

DATA SHEET:

Download data sheet file (1893.94 kb)

High-Voltage Amplifier

CATALOG NAME: Trek Model 30/20A-H-CE

DESCRIPTION: Output Voltage Range: 0 to ±30 kV DC or peak AC. Output Current Range: 0 to ±20 mA DC or peak AC. Input Voltage Range: 0 to ±10 V DC or peak AC. Input Impedance: 50 kohm, nominal for noninverting input configuration; 25 kohm, nominal for inverting input configuration. DC Voltage Gain: 3000 V/V. DC Voltage Gain Accuracy: Better than 0.1% of full scale. Offset Voltage: Less than ±4 V. Output Noise: Less than 5 V rms (measured using the true rms feature of the Hewlett Packard Model 34401A digital multimeter). Slew Rate (10% to 90%, typical): Greater than 500 V/µs. Large Signal Bandwidth (2% Distortion): DC to greater than 2.5 kHz. Small Signal Bandwidth (-3dB): DC to greater than 20 kHz. Stability: Drift with Time Less than 50 ppm/hr, noncumulative. Drift with Temperature: Less than 100 ppm/°C. Settling Time (to 1%): Less than 200 µs for a 0 to 30 kV step. http://www.trekinc.com/products/30-20A.asp

PRODUCER: Trek inc.

PRODUCTION YEAR: 2006

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (2442.29 kb)

Piezometer PIEZOTEST

CATALOG NAME: PM300

DESCRIPTION: Piezoelectric Tests d33 – Very High Range d33 range: 100 to 10,000 pC/N Accuracy: ± 2% ± 1 pC/N Loading: 1.0uF d33 - High Range d33 range: 10 to 1000 pC/N Accuracy: ± 2% ± 1 pC/N Loading: 1.0uF d33 - Low Range d33 range: 1 to 100 pC/N Accuracy: ± 2% ± 0.1 pC/N Loading: 1.0uF d33 – Very Low Range d33 range: 0 to 10 pC/N Accuracy: ± 2% ± 0.01 pC/N Loading: 0.1uF d31 & d15 Adapters are available for various sample geometries, and supplied separately. Polarity Sample polarity is indicated for all measurement ranges. Test Frequency Frequency Range: 30 Hz to 300 Hz Setting: In steps of 1 Hz Accuracy: ± 0.1 Hz Calibration is at 110 Hz. Other frequencies may be used to tune away from system resonances with large samples. Force amplitude Static force of approximately 10 N used to grip the sample. This may be different for force head units with non-standard suspension (see section on ‘Sample Size’ below). Testing is by an oscillatory force of between 0.05 N to 0.5 N. Dielectric Tests Capacitance Capacitance range: 10 pF to 0.1 μF Accuracy: ± 2% ± 1 pF Test frequency: 1 kHz Tan δ Tan δ range: 0.0000 to 0.2000 Accuracy: ± 2% ± 0.0001

PRODUCER: PIEZOTEST

PRODUCTION YEAR: 2012

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (14216.24 kb)

Oscilloscope Analog/Digital Mixed Signal Combiscope

CATALOG NAME: Hameg HM1508-2

DESCRIPTION: 1 GSa/s Real Time Sampling, 10 GSa/s Random Sampling 1 MPt memory per channel allows Memory Zoom up to 50,000:1 Frequency spectrum display with FFT 4 channels (2 analog, 2 logic inputs), Time Base 50 s/cm – 5 ns/cm Pre/Post Trigger -100 % to +400% 8-Bit Low Noise Flash A/D Converters Acquisition modes: Single Event, Refresh, Average, Envelope, Roll, Peak-Detect USB-Stick and USB/RS-232 Interface, optional: IEEE-488, Ethernet/USB Signal display: Yt, XY and FFT; Interpolation: Sinx/x, Pulse, Dot Join (linear) Analog mode: as HM1000-2, but 150MHz

PRODUCER: Hameg

PRODUCTION YEAR: 2008

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (445.86 kb)

Function & arbitrary waveform Generator

CATALOG NAME: DS 345

DESCRIPTION: FREQUENCY RANGE Waveform Maximum Freq Resolution Sine 30.2 MHz 1 µHz Square 30.2 MHz 1 µHz Ramp 100 KHz 1 µHz Triangle 100 KHz 1 µHz Noise 10 MHz (Gaussian Weighting) Arbitrary 10 MHz 40 MHz sample rate LINE VOLTAGE SELECTION The DS345 operates from a 100V, 120V, 220V, or 240V nominal ac power source having a line frequency of 50 or 60 Hz.

PRODUCER: Stanford Research Systems

PRODUCTION YEAR: 2012

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (629.44 kb)

DSP Lock-In Amplifier

CATALOG NAME: SR830

DESCRIPTION: SIGNAL CHANNEL Voltage Inputs Single-ended (A) or differential (A-B). Current Input 106 or 108 Volts/Amp. Full Scale Sensitivity 2 nV to 1 V in a 1-2-5-10 sequence (expand off). Input Impedance Voltage: 10 MW+25 pF, AC or DC coupled. Current: 1 kW to virtual ground. Gain Accuracy ±1% from 20°C to 30°C (notch filters off), ±0.2 % Typical. Input Noise 6 nV/ÖHz at 1 kHz (typical). Signal Filters 60 (50) Hz and 120(100) Hz notch filters (Q=4). CMRR 100 dB to10 kHz (DC Coupled), decreasing by 6db/octave above 10 kHz Dynamic Reserve Greater than 100 dB (with no signal filters). Harmonic Distortion -80 dB. REFERENCE CHANNEL Frequency Range 1 mHz to 102 kHz Reference Input TTL (rising or falling edge) or Sine. Sine input is1 MW, AC coupled (>1 Hz). 400 mV pk-pk minimum signal. Phase Resolution 0.01° Absolute Phase Error <1° Relative Phase Error <0.01° Orthogonality 90° ± 0.001° Phase Noise External synthesized reference: 0.005° rms at 1 kHz, 100 ms, 12 dB/oct. Internal reference: crystal synthesized, <0.0001° rms at 1 kHz. Phase Drift <0.01°/°C below 10 kHz <0.1°/°C to 100 kHz Harmonic Detect Detect at Nxf where N<19999 and Nxf<102 kHz. Acquisition Time (2 cycles + 5 ms) or 40 ms, whichever is greater. DEMODULATOR Zero Stability Digital displays have no zero drift on all dynamic reserves. Analog outputs: <5 ppm/°C for all dynamic reserves. Time Constants 10 μs to 30 s (reference > 200 Hz). 6, 12, 18, 24 dB/oct rolloff. up to 30000 s (reference < 200 Hz). 6, 12, 18, 24 dB/oct rolloff. Synchronous filtering available below 200 Hz. Harmonic Rejection -80 dB INTERNAL OSCILLATOR Frequency 1 mHz to 102 kHz. Frequency Accuracy 25 ppm + 30 μHz Frequency Resolution 4 1/2 digits or 0.1 mHz, whichever is greater. Distortion f<10 kHz, below -80 dBc. f>10 kHz, below -70 dBc.1 Vrms amplitude. Output Impedance 50 W Amplitude 4 mVrms to 5 Vrms (into a high impedance load) with 2 mV resolution. (2 mVrms to 2.5 Vrms into 50W load).

PRODUCER: Stanford Research Systems

PRODUCTION YEAR: 2012

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (1261.65 kb)

High speed high voltage amplifier DC - 5MHz

CATALOG NAME: WMA-320

DESCRIPTION: Technical specifications Amplification: 50x, fixed Bandwidth: DC – 5MHz @ -3dB large signal bandwidth Slew rate: 1300V/μs typical Delay time: 140ns input to output Output voltage: -100V to +100V Current: 300mA typical with limiter Noise and offset: 12mV rms noise over the full bandwidth typical, 100mV offset typical Input impedance: 50W Output impedance: 50W Stability: stable with all capacitive and resistive loads Power: 230V 50Hz AC, 120W Mains fuse: 2x 0.63A 230V slow blow

PRODUCER: Falco Systems

PRODUCTION YEAR: 2013

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (3895.99 kb)

Triple Power Supply

CATALOG NAME: H M 7 0 4 2 - 5

DESCRIPTION: 2x 0-32 V/0-2 A 0-5.5 V/0-5 A Separate voltage and current displays for each output: 4 digits at channel I+III; 3 digits at channel II Display resolution: 10mV/1 mA at channel I+III; 10mV/10 mA at channel II Adjustable current limiting and electronic fuse for each output Pushbutton for activating/deactivating all outputs Low residual ripple, high output power, very good regulation Temperature-controlled fan

PRODUCER: Hameg

PRODUCTION YEAR: 2012

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (183.65 kb)

Multifunction Data Acquisition

CATALOG NAME: NI PCI-6221

DESCRIPTION: NI recommends high-speed M Series (NI 625x) for 5X faster sampling rates, high-accuracy M Series (NI 628x) for 4X higher resolution, or industrial M Series (NI 623x) for 60 VDC isolation and superior noise rejection 16, 32, or 80 analog inputs at 16 bits, 250 kS/s Up to 4 analog outputs at 16 bits, 833 kS/s (6 μs full-scale settling time) Programmable input range (±10, ±5, ±1, ±0.2 V) per channel Up to 48 TTL/CMOS digital I/O lines (up to 32 hardware-timed at 1 MHz) Two 32-bit, 80 MHz counter/timers Digital triggering X1, X2, or X4 quadrature encoder inputs

PRODUCER: NATIONAL INSTRUMENTS

PRODUCTION YEAR: 2013

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (759.46 kb)

Educational Kit Unit Radiant Technologies

CATALOG NAME: Radiant EDU

DESCRIPTION: • +/- 10V Test Stimulus • 100Hz to 1Hz Fatigue Frequency • USB Interface • EDU software • Packaged Capacitors (10ea) • Includes on-line documentation • For tester, short course on the theory of electric components and a library of recommended experiments

PRODUCER: Radiant Technologies, Inc., USA

PRODUCTION YEAR: 2006

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (501.54 kb)

LCR meter

CATALOG NAME: RLC CHY Model 24C

DESCRIPTION: 3-1/2 digits, 20Ohm-2GOhm, 200uH-20H, 200pF-20mF LCD display 3 1/2 digits. - 2000 pts Dimensions: 200x90x40 mm Resistance Range 20Ohm to 2000MOhm Inductance Range 200µH to 20 H Capacitance Range 200pF to 20 mF Temperature: -20°C to 750°C Frequency measurement Ranges: 2KHz, 20KHz, 200KHz, 2MHz, 15 MHz. Tension DC 0-20V DC Signal generator: frequency 2,5KHz, square Automatic polarity indicator, range go past indicator (“OL” ou “-OL”). Low battery indicator Automatic reset , autonomy 60 hours (alkaline).

PRODUCER: Chy Firemate

PRODUCTION YEAR: 2007

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (342.24 kb)

Keithley Electrometers for Ultra-High Resistance/Ultra-Low Current Measurements

CATALOG NAME: Model 6514 System Electrometer

DESCRIPTION: Choose from three sensitive options for precision high resistance and low current measurements. The 5½-digit Model 6514 and Model 6517B Electrometers offer 1fA sensitivity, >200TΩ input impedance on voltage measurements, and charge measurements down to 10fC. The 6½-digit Model 6430 Sub-Femtoamp Remote SourceMeter SMU Instrument can measure current with 1aA sensitivity. Its low noise and drift performance make it ideal for research on single electron devices, highly resistive nanowires and nanotubes, polymers, and electrochemical applications.

PRODUCER: Keithley

PRODUCTION YEAR: 2014

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (3937.7 kb)

KIMO Digital Thermometer

CATALOG NAME: STKC150 / STPC150

DESCRIPTION:

PRODUCER: KIMO

PRODUCTION YEAR: 2006

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (179.71 kb)

IR Thermometer

CATALOG NAME: CS LT15 KIT

DESCRIPTION: Green LED alarm indication, aiming support, self diagnostic or temperature code indication Usable up to 80°C ambient temperature without cooling Scalable analogue output: 0-10 V or 0-5 V + alarm output or digital output USB programming interface, direct serial 9.6 kBaud interface Power supply: 5-30 V DC

PRODUCER: OPTRIS

PRODUCTION YEAR: 2014

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (870.44 kb)

Temperature Panel Controller Regulator

CATALOG NAME: HD 4037

DESCRIPTION: Two set point (two channels) digital LED regulator 96x48. Pt100 sensor. Range -50°C…+800°C. Resolution 0,1°C from -50°C+200°C, 1°C from 200°C…+800°C. Independent hysteresis 1...20°C (0,5...6°C on request). Relay 5A/220V resistive. Power supply 24Vac, on request 110…230Vac. Without probe. TECHNICAL DATA Using range: -50°C...+85O°C Resolution: 0. 1 °C up to 195°C, 1 °C beyond 195°C Display: LED 3 1/2 figures, 10 mm Precision: 0.2°C ±0.1 % of reading up to 195°C; 1 °C ±0.4% of reading beyond 195°C Connection: with 2 or 3 wires, Pt100 sensor Power supply: 24 VAC., 5 VA Output: 2 exchange contacts 5 A/220 VAC. resistive (2 independent relays) Hysteresis: 0.5 ... 6°C, adjustment with 1 -turn trimmer Working temperature: -5...+45°C Front panel dimensions: 48 x 96 mm

PRODUCER: HOTEK Technologies, USA

PRODUCTION YEAR: 2007

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Line generator, optic / Laser Diode

CATALOG NAME: LGO115/40

DESCRIPTION:

PRODUCER: Imatronic

PRODUCTION YEAR: 2014

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (669.49 kb)

MULTICOMP PELTIER COOLER

CATALOG NAME:

DESCRIPTION: 2 models MULTICOMP PELTIER COOLER (71.8W , 112.7W) MULTICOMP PELTIER COOLER 71.8W Transducer Function:Thermoelectric Module; Power Rating:71.8W; Internal Resistance:6.8ohm; Current Max @ Diff Temperature Max:3.9A; Voltage Max @ Diff Temperature Max:29.9V; Temperature Max:29.9V; MULTICOMP PELTIER COOLER 112.7W Transducer Function:Thermoelectric Module; Power Rating:112.7W; Internal Resistance:4.27ohm; Current Max @ Diff Temperature Max:6A; Voltage Max @ Diff Temperature Max:29.9V;

PRODUCER:

PRODUCTION YEAR:

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (497.79 kb)

Analog Solder Station

CATALOG NAME: WES51

DESCRIPTION: The WES51's heater and sensor combination offers quick heat-up times and temperature recovery for highly efficient soldering.View larger. The Weller WES51 Analog Soldering Station features: An included power unit, soldering pencil, stand, and sponge A durable design ideal for industrial manufacturing applications Temperature lock-out that prevents excessive temperatures An automatic sleep-mode that turns off soldering station after 99 minutes of inactivity Adjustable temperature controls; quick heat-up and recovery times Electronic Temperature Control for Precise Performance

PRODUCER: Weller

PRODUCTION YEAR: 2007

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Directional antenna up to 6GHz

CATALOG NAME: HyperLOG 7060

DESCRIPTION: Wide Band Log Periodic Directional Antenna HyperLOG 7060 with higher frequency range up to 6GHz which now also covers 5GHz WLan. 700MHz-6GHz; - VSWR: <1:2 (typ.) - Gain: 5dBi (typ.) - RF connection: SMA (f) or N (see optional adapter) - Tripod connection: 1/4" - Calibration steps: 533 (10MHz-steps) - Dimensions (L/W/D):340x200x25 mm - Weight: 250gr Every HyperLOG directional antenna goes through rigorous testing in our laboratories before dispatch and is equipped with a high quality GOLD COATING, a high-tech antenna-case (radome) which offers protection against mechanical damage and environmental influence, a top-quality integrated tripod connection and an SMA connector (18GHz version) with twist protection.

PRODUCER: Aaronia

PRODUCTION YEAR: 2012

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (521.47 kb)

High-Temperature Laboratory Furnace

CATALOG NAME: LHT 04/16 P310

DESCRIPTION: Maximum temperature 1600oC Designed as a tabletop model, these compact high-temperature furnaces offer numerous advantages. Their first-class finish and high-quality materials, combined with simple operation, make these furnaces all-rounders in research and laboratory applications. These furnaces are also optimally suited to sintering technical ceramic, e.g. zirconium oxide dental bridges. High-quality insulating materials enable energy-saving operation and a short heating time due to low heat storage and thermal conductivity. LHT series high-temperature furnaces reach a max. furnace chamber temperature of 1600°C, 1750°C or 1800°C. This product also stands out because of its:  High-quality molybdenum disilicide heating elements  Furnace chamber lined with first-class, durable fiber material  Housing consisting of structured stainless steel sheets  Double-walled housing with additional fan cooling for low exterior temperatures  Furnace sizes of 2, 4 or 8 liters  Lift-door with the hot side facing away from the operator  Exhaust air opening in the roof  Type B thermocouples  Switching system with thyristors in phase angle operation

PRODUCER: Nabertherm

PRODUCTION YEAR: 2011

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (2589.02 kb)

Laboratory Furnace

CATALOG NAME: LT 9/11 P330

DESCRIPTION: Temperature max 1300 oC Easy-to-replace integrated heating elements are protected from fumes and splashing Highly durable cured vacuum fiber module lining offers excellent temperature distribution Double-walled casing for low external temperatures and high stability Vertical lift door conserves lab space while keeping you safe from heated surface These muffle furnaces feature an exhaust air outlet in rear wall of furnace, stainless steel exterior that resists corrosion and a vertical lift door for full access to the chamber and protection from the heated door surface. A clear, blue-white LCD provides a clear view of furnace operating parameters. The digital controller offers nine programs with four ramp and soak pairs. Ceramic heating plates with integrated heating elements remain safe from fumes and splashing. Order optional vent with fan to facilitate exhaust removal.

PRODUCER: Nabertherm

PRODUCTION YEAR: 2014

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (1421.09 kb)

Sand bath

CATALOG NAME: S70

DESCRIPTION: FALC's sand baths are ideal for the homogenous heating of the contents in the baths. The external structure is made of steel which has been oven coated with acid-resistant epoxy paint whilst the inner tanks are made of extra thick 304 stainless steel.

PRODUCER: FALC INSTRUMENTS

PRODUCTION YEAR: 2013

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (1787.55 kb)

Balances with 5 digits and density kit

CATALOG NAME: Discovery DV215CD

DESCRIPTION: Balances with 5 digits and density kit

PRODUCER: OHAUS

PRODUCTION YEAR: 2013

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (2716.25 kb)

PERISTALTIC PUMP

CATALOG NAME: rotarus standard 50

DESCRIPTION: rotarus® standard 50 Peristaltic pump for continuous delivery in speed ranges from 0.2 to 100 revolutions per minute rotarus® standard is the powerful basic model in the peristaltic pump series. The cost-effective, precise delivery pump for small delivery volumes and high viscosities is ideal for flexible applications, thanks to the use of diverse pump heads and hoses. The control panel on the housing enables simple and rapid configuration of the most important parameters, and the speed can be programmed directly on the unit. Performance class with 50 Watt ensures exact delivery in speed ranges from 0.2 to 100 revolutions per minute. Housings are available with a white powder coating (protection class IP54) and inox stainless steel design (rotarus® standard 50i, protection class IP65). The pump head connection technology was developed for rapid handling. Overview of details Changeable pump heads, single and multichannel design Rapid tool-free changing of pump heads - Control panel located directly on pump housing Calibratable Operation with 24 V DC Pump heads from other manufacturers can be fitted without difficulty using an adapter Comprehensive accessory range

PRODUCER: Hirschmann Laborgeräte GmbH & Co

PRODUCTION YEAR: 2015

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (1824.25 kb)

Centrifuge

CATALOG NAME: Universal 320

DESCRIPTION: Introducing the UNIVERSAL 320 benchtop centrifuge for Clinical, Research and Industrial applications. The UNIVERSAL 320 offers laboratories a true workflow benefit due to its vast capabilities as mid-sized, general purpose, tabletop centrifuge. Available with temperature control, the UNIVERSAL 320R refrigerated centrifuge offers a unique fast-cool function that will lower the unit to +4 °C in 10-15 minutes saving you valuable time spinning delicate samples. TUBE QTY VOLUME (mL) SIZE (mm) RPM RCF 16 5 (Conical) 17 x 59 4,500 3,328 PACKAGE CONTENTS (1) Centrifuge, (1) 90° Swing-out Rotor, (4) Buckets, (4) Adapters 5 mL conical, (4) Bio-containment Lids

PRODUCER: Andreas Hettich GmbH & Co.KG

PRODUCTION YEAR: 2015

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (3985.4 kb)

Reactor for hydrothermal reactions (Acid Digestion Bombs)

CATALOG NAME: 4748

DESCRIPTION: The 4748 and 4748A vessels are the largest of all Parr acid digestion vessels. The 4748 has a 125 mL, removable PTFE cup in a stainless steel body with six cap screws in the screw cap to seal the flanged PTFE cup. An expandable wave spring maintains continuous pressure on the seal during the cooling cycle when PTFE parts might otherwise relax and leak. Stirring can be provided with a magnetic stir bar. The 4748A is a 200 mL modification of the 125 mL, 4748 PTFE lined vessel for users who want additional capacity in this model. A safety rupture disc above the PTFE cup will blow out through an opening in the vessel head if pressure should accidentally reach the 3500 psi range. But for safe operation, pressures in these vessels should never exceed 1900 psi and temperatures must not exceed 250 °C. Operations should be conducted well below these limits whenever possible due to the potential destructive forces in a large vessel charge. It also is advisable to test any new procedures for safety in one of the smaller vessels before scaling up to these sizes. A wrench for the cap screws is furnished with these vessels. No other accessories are required.

PRODUCER: Parr

PRODUCTION YEAR: 2015

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (177.98 kb)

Magnetic stirrer with heating

CATALOG NAME: 50680002

DESCRIPTION: Water resistent Vol max: 1 litru Speed: 40-2000 rpm Microprocesor Memory IP57

PRODUCER: Precisa

PRODUCTION YEAR: 2011

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Mechanic stirrer

CATALOG NAME: Nahita 686/1

DESCRIPTION: Speed 100-1000 r.p.m. Volum max:5 l Dimensions: 160x160x370 mm Power 100W 220V/50Hz

PRODUCER: Nahita

PRODUCTION YEAR: 2015

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Ultrasonic bath

CATALOG NAME: LBS2 15 L

DESCRIPTION:

PRODUCER: FALC INSTRUMENTS

PRODUCTION YEAR: 2015

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

SET-up dc tunability for ceramics measuremets

CATALOG NAME: -

DESCRIPTION: http://apps.webofknowledge.com/full_record.do?colName=DIIDW&recordID=2011B47458&log_event=no&page=1&qid=1&log_event=yes&viewType=fullRecord&SID=V2A67FZTHmmiBi8JwnR&product=UA&doc=1&search_mode=GeneralSearch

PRODUCER: (in house)

PRODUCTION YEAR: 2008

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (33.72 kb)

SET-up P(E) for ceramics measuremets

CATALOG NAME: -

DESCRIPTION:

PRODUCER: in house

PRODUCTION YEAR: 2010

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Isostatic press

CATALOG NAME: P/N 2864 0000

DESCRIPTION: High isostatic press up to 2500 bar, inside volume 0.3 l, working temperature - room temperature.

PRODUCER: TOP INDUSTRIE High pressure engineering, FRANCE

PRODUCTION YEAR: 2016

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Chemical Niche

CATALOG NAME: HCC 1200

DESCRIPTION:

PRODUCER: ELECTRONIC APRIL SRL

PRODUCTION YEAR: 2016

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

USB acquisition board

CATALOG NAME: Model 4716-AE

DESCRIPTION:

PRODUCER:

PRODUCTION YEAR: 2016

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Forced-air Convection Oven with Single DISPLAY

CATALOG NAME: UF30

DESCRIPTION: Description Over 65 years of permanent development work and copious user feedback from practical experience are invested in each heating oven design Precise and homogenous temperature control independent of chamber volume and load Temperature range up to +300 °C Eight model sizes 30L to 750L Two model variants: SingleDISPLAY and TwinDISPLAY Natural convection or forced air circulation models N/F Augmented functionality with convenient, approved and tested accessories Working chamber and housing constructed almost exclusively from high-quality, corrosion-resistant and easily cleanable stainless steel A wide range of options for programming and documentation using interfaces, integrated data logger and Software AtmoCONTROL Three-year guarantee for appliances except wear and tear parts The temperature values of all universal ovens are measured according to DIN 12880: 2007-05 Each universal oven is safety-tested and carries 'CE' symbol

PRODUCER: Memmert™

PRODUCTION YEAR: 2016

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (8892.09 kb)

Water distiller

CATALOG NAME: DP4000

DESCRIPTION: Distilator recomandat pentru farmacie, laborator, industrie Debit 4 L/h Conductivitate apa distilata 1,5...2,5uS/cm Constructie din sticla borosilicata Debitul apei de racire 50 L/h Intrerupator pornit/oprit cu lampa de control Protectie la supraincalzire Protectie la debit scazut de apa Alimentare 220 V Putere consumata 3,1 kW Un aparat de calitate superioara, automat, practic,cu design compact simplu de instalat , intretinut si utilizat

PRODUCER: Tecnosklo - Cehia

PRODUCTION YEAR: 2017

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Function Generator, Arbitrary

CATALOG NAME: AFG3051C

DESCRIPTION: Unmatched performance, versatility, intuitive operation, and affordability make the Function, Arbitrary Waveform, and Pulse Generators the most useful instruments in the industry Pulse Waveform with Variable Edge Times AM, FM, PM, FSK, PWM Sweep and Burst Dual-channel Models Save Cost and Bench Space USB Connector on Front Panel for Waveform Storage on Memory Device USB, GPIB, and LAN LabVIEW and LabWindows/IVI-C Drivers

PRODUCER: Tektronix

PRODUCTION YEAR: 2017

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (711.85 kb)

Precision Multiferroic II 500V Ferroelectric test system Built-in +/-500V Multi-Gain Amplifier

CATALOG NAME: Multiferroic II/ Ferroelectric Test System

DESCRIPTION: Radiant’s Multiferroic II Test System is the most advanced test system on the market. The Multiferroic’s unique frequency rating is 270KHz@+/-100V, 100KHz @200V and 5KHz@500V using a built-in internalamplifier. The Multiferroic II is expandable to 4kV and 10kV. The Multiferroic II is ideal for magnetoelectric testing »18-bit resolution at 2MHz single pass capture rate»10MHz -16-bit Stimulus interlace»Hysteresis accuracy 0.5% »Maxim um data points 30,000»M a x i m u m pulse width 1s and Minimum pulse width 0.5μs »Executes hysteresis loops to 270kHz up to +/-100V »Fatigues using an internal waveform generator at 2.5MHz»1pA* current resolution measuring DC leakage »Measures 200fC of charge in a single 1 second pass considering allnoise sources combined! »A l l test can be obtained without any configuration change. Radiant’s testsystems are offered in a single self-contained enclosure. »Vision Data Acquisition & Management Software is provided with RadiantTest Systems. Optional packages for Mangetoelectric thin and bulk filmtesting, Pyroelectric, Piezoelectric, e31 and Transistor Testing

PRODUCER: Radiant Technologies, Inc.

PRODUCTION YEAR: 2019

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (470.71 kb)

Precision 10KV High Voltage Interface

CATALOG NAME: Precision 10KV HVI-SC

DESCRIPTION: The Precision Single Channel High Voltage Interface (10kV HVI-SC) is an attachment for any Precision test system. The 10kV HVI-SC will control the connection of a single High Voltage Amplifier to the sample under test protecting against any latent charge remaining on the test sample. The HVI has two primary functions. First, it acts as a signal router, sending stimulation voltages from the tester to the HVA while connecting the output of the HVA to the sample. The return signal from the sample is also routed through the HVI on its way back to the tester for analysis. The second primary function of the HVI is to provide protection to the user from the high voltages present during and after tests. The maximum voltage rating for the Precision HVI-SC is 10KV. HVI2 Specifications: » Maximum International Voltage Rating: 10KV (AC) » Power: 100V to 240V, 50 to 60Hz » High Speed Protection Current Rating: 10 Amps » High Speed Protection Trigger Voltage 2.1V » Low Speed Protection Delay Time 14ms » Isolation Relay Switchable Voltage 12KV » International Insulation Rating: >40KV DC 4

PRODUCER: Radiant Technologies, Inc.

PRODUCTION YEAR: 2019

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (198.06 kb)

RADIANT’S NEW D33 HEATED BULK PIEZOELECTRIC/PYROELECTRIC TEST BUNDLE

CATALOG NAME: RADIANT’S NEW D33 HEATED BULK PIEZOELECTRIC/PYROELECTRIC TEST BUNDLE (HB-PTB)

DESCRIPTION: The bundle includes a Piezoelectric Displacement Sensor, Heated Piezoelectric/Pyroelectric Measurement Test Fixture, and Advanced Piezoelectric Software. The Bulk Piezoelectric/Pyroelectric Test Bundle allows samples to internally be heated to 230oC in a self-contained test fixture. The heating unit is built-in to the sample holder, so no additional temperature chamber is necessary. The bundle's simple user interface is controlled by Radiant's fully automated Vision Data Acquisition Software. The heated test fixture provides a safe operating environment for testing at high voltages (10kV) and is rated to 230C. The fiber optic sensor detects the amplitude of non-coherent light rejected from the sample surface to determine the distance from the sensor wand to the sample surface. The Bulk Piezoelectric/Pyroelectric Test Bundle is a cost effective option for researchers measuring piezoelectric displacements on the order of one micron or larger using Radiant testers. Converse D33 Measurements are easily extracted. Features: SAFE HIGH VOLTAGE TESTING Test Fixture rated to 230C. Constructed from 50kV Teflon with 25kV connectors rated to 250ºC. BUILT-IN OIL BATH SIMPLE TO OPERATE VERSATILE Production or research FLEXIBLE Accommodates sample diameters ranging from 5mm to 30mm with a maximum thickness of 12mm.

PRODUCER: Radiant Technologies, Inc.

PRODUCTION YEAR: 2019

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (529.71 kb)

RADIANT’S NEW THIN FILM PIEZOELECTRIC TEST BUNDLE

CATALOG NAME: RADIANT’S NEW THIN FILM PIEZOELECTRIC TEST BUNDLE (TF-PTB)

DESCRIPTION: Radiant's Thin Film Piezoelectric Test Bundle accurately determines the e31, d31 and e33 coefficients for piezoelectric thin films with 2% reload uniformity. THE THIN FILM PIEZOELECTRIC TEST BUNDLE MEASURES THE PIEZOELECTRIC COEFFICIENTS OF THIN PIEZOELECTRIC FILMS DEPOSITED ON CANTILEVERS. VOLTAGES APPLIED TO THE PIEZOELECTRIC FILM WILL BEND THE SUBSTRATE IN VARIOUS DIRECTIONS. THE DISPLACEMENT IS CAPTURED BY THE DISPLACEMENT SENSOR CONFIGURED TO CAPTURE THE MOTION OF THE CANTILEVER TIP. RADIANT'S BUNDLE ACCOMMODATES 72mm (4") AND 43mm (2") CANTILIVERS. RADIANT ALSO OFFERS A TOWER VARIABLE FOR (LDV's) - WORKS WITH LASER VIBROMETERS OR POLYTEC SYSTEMS. Three types of measurements can be taken with the Thin Film Piezoelectric Test Bundle and a Radiant Precision Test System. 1). Determines cantilever tip displacement as a function of voltage. 2). The second type of test that can be executed is a direct d31 measurement. This is accomplished by forcing the cantilever tip to move while recording the charge generated by the piezoelectric capacitor as it is stressed. 3). Measures E33 if interdigitated electrodes are used. Features: ACCURATE - Reproducible to 1%, unload and reload to 2%. INEXPENSIVE REPRODUCIBLE - No variance for re-loading same sample. SIMPLE TO OPERATE VERSATILE - Thin film or bulk, production or research. FLEXIBLE - The Thin Film Piezoelectric Test Bundle will accommodate various sample geometries. Measurements with the Thin Film Piezoelectric Test Bundle Include but are not limited to: E31, D31, E33 vs Thickness Displacement vs voltage Piezoelectric Fatigue Piezoelectric Ageing Composition Comparison Process Monitoring Multiple Plotting and Averaging

PRODUCER: Radiant Technologies, Inc.

PRODUCTION YEAR: 2019

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (2411.64 kb)

Magnetoelectric Thin Film/Bulk Ceramic Bundle

CATALOG NAME: Magnetoelectric Thin Film/Bulk Ceramic Bundle

DESCRIPTION: The Magnetoelectric Test is executed in Vision on a Precision ferroelectric tester by the Magnetoelectric Response Task, ME Task for short. Radiant also offers a Magnetoelectric Bundle that provides a complete hardware/software package to make testing Magnetoelectric response simple and cost effective. There are a wide variety of measurements besides the magnetoelectric response that can be executed with the Magnetoelectric Response Task and Hardware Bundle: 1)Polarization Hysteresis vs Magnetic Field 2)Remanent Polarization vs Magnetic Field 3)PUND vs Magnetic Field 4)Conduction vs Magnetic Field (the so-called magneto-resistivememory effect) 5)IV vs Magnetic Field 6)Small Signal Capacitance vs Magnetic Field Magnetoelectric Hardware/Software Bundle:Radiant's magneto bundle offers researchers a complete platform to efficiently characerize magnetoelectric thin film or bulk devices.The Thin Film or Bulk Magneto Hardware and Software Bundle Includes: Radiant Precision Current Source CS-2.5 (includes 2 voltage outputs, current sensor, 2.5 amp current source Hemholtz Coil,Gauss meter, Test Fixture for thin film or bulk devices and Magnetoelectric software task.

PRODUCER: Radiant Technologies, Inc.

PRODUCTION YEAR: 2019

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase)

DATA SHEET:

Download data sheet file (897.71 kb)

Freeze Dryer

CATALOG NAME: HyperCOOL HC3110

DESCRIPTION: Freeze Dryers & Cooling Traps - Ultimate Chamber Temp (at RT) : -110℃ - ICE condensing capacity: 3kg - Chamber Volume : 4 L - Trap (Chamber) Size (Ø x L) : 165 x 202 mm - Dimension(W x D x H): 400 x 660 x 570 mm - Weight: 72 kg Product Features • Effective for fast freeze drying of any samples • HyperVAC-MAX empowered by HyperCOOL guarantees capacity and performance at higher level. • HyperCOOL by itself, when equipped with manifolds or chambers, becomes a versatile freeze dryer. • Extended applications for concentrating wider range or larger volume of solvents. • The compatible vacuum rotary vane pump generates vacuum down inside the chamber. • Up to 8 external bottles can be accommodated by the manifolds of HyperCOOL. • Automatic De-Vac and De-Ice functions installed Model HC3110 Ultimate chamber temp (at RT) (℃) -110 Chamber volume (L) 4 Trap (Chamber) size (Ø x L) 165 x 202 ICE condensing capacity (kg) 3 ICE condensing performance (kg/day) 2.5 Compressor 1/3 HP x 2 Refrigerant R507/R1150 Digital readout Time, Temperature Function Keylock, Defrost, Vacuum, Time Power requirement (Resting, VA) 819 Power supply(V/Hz) 220 V/50~60 Hz (110 V optional) Dimension (W x D x H, mm) 400 x 660 x 570 Weight (kg) 72 Cat. No. HHC-3110 (HHC-3110-110)

PRODUCER: Hanil Scientific Inc.

PRODUCTION YEAR: 2021

COMMISSIONING DATE: 28/07/2021

PRICE RANGE (at the time of purchase) 10.001 € – 50.000 €

DATA SHEET:

Download data sheet file (857.77 kb)

Vibratory Sieve Shaker

CATALOG NAME: Vibratory Sieve Shaker AS 200 digit cA

DESCRIPTION: The analytical sieve shakers of the series AS 200 are used in research & development, quality control of raw materials, interim and finished products as well as in production monitoring. The controllable electromagnetic drive offers an optimal adaption for every product. Sharp fractions are obtained even after short sieving times. The AS 200 digit cA sieve shaker is recommended whenever controlled amplitude, digital display of vibration height and time and interval operation are required. APPLICATION EXAMPLES cement clinker, chemicals, coffee, construction materials, fertilizers, fillers, flours, grains, metals powders, minerals, nuts, plastics, sand, seeds, soils, washing powder, ... PRODUCT ADVANTAGES NEW: controlled amplitude suitable for dry and wet sieving excellent separation efficiency even with short sieving times efficient electromagnetic drive 3-D throwing motion which ensures optimum use of the open sieve area and lets the sample move equally over the whole sieving surface maintenance-free sieve stack up to 510 mm height free adjustment of all process parameters (time, amplitude) interval operation (fix 10 s) digital display of vibration height and time easy operation, ergonomic design FEATURES Applications separation, fractioning, particle size determination Feed material powders, bulk materials, suspensions Measuring range* 20 µm - 25 mm Sieving motion throwing motion with angular momentum Max. batch / feed capacity 3 kg Max. number of fractions 9 / 17 Max. mass of sieve stack 4 kg Amplitude digital, 0.2 - 3.0 mm Controlled amplitude yes Time display digital, 1 - 99 min Interval operation 10 s Storable SOPs 1 Suitable for dry sieving yes Suitable for wet sieving yes USB interface uitable sieve diameters 100 mm / 200 mm / 203 mm (8") Max. height of sieve stack 510 mm Clamping devices "standard", "comfort", each for wet and dry sieving Power connection 1-phase W x H x D 417 x 212 x 384 mm Net weight ~ 35 kg

PRODUCER: RETSCH

PRODUCTION YEAR: 2021

COMMISSIONING DATE: 01/09/2021

PRICE RANGE (at the time of purchase) less than 5.001 €

DATA SHEET:

Download data sheet file (2230.82 kb)

Precision Cutter

CATALOG NAME: MICRACUT 152

DESCRIPTION: Precision Cutters MICRACUT precision cutters are used for precise and deformation-free cutting of “Metals, Ceramics, Electronic Components, Crystals, Composites, Biomaterials, Sintered Carbides, Minerals, etc.” MICRACUT has its place in virtually any metallurgical, geological, electronics, research, biomedical or industrial laboratory. Capable of cutting most materials such as, brittle or ductile metals, hard or soft metals, composites, ceramics, rocks, biomaterials, laminates, etc. They are designed for cutting all types of materials with minimal structural deformation. MICRACUT 152 accommodates diamond and abrasive wheels up to 175 mm (7”) diameter and the speed range is between 0 and 1000 rpm. The gravity feed loading design minimizes sample deformation. The sliding weight arm with counterweight allows precise force application. The digital micrometer enables the operator to set the cutting width with a resolution of 1 micron. The digital micrometer is interchangeable and the customer can mount other types of micrometers if and whenever required. The coolant tray is removable from the front of the instrument for easy cleaning. Model Micracut 152 Cutting Capacity, ø (mm) 50 Max Disc Dia., (mm) 175 Cutting Method Gravity Feed Power, (Watt) 100 Disc Speed, (rpm) 0-1000 Dimensions, W+(mic.)xDxH, (cm) 51 x 43 x 34 Weight, (kgs) 28 Voltage 1 ph, 230V, 50Hz. AC Model Micracut 152 Cutting Capacity, ø (mm) 50 Max Disc Dia., (mm) 175 Cutting Method Gravity Feed Power, (Watt) 100 Disc Speed, (rpm) 0-1000 Dimensions, W+(mic.)xDxH, (cm) 51 x 43 x 34 Weight, (kgs) 28 Voltage 1 ph, 230V, 50Hz. AC

PRODUCER: Kemet

PRODUCTION YEAR: 2021

COMMISSIONING DATE: 01/08/2021

PRICE RANGE (at the time of purchase) 5.001 € - 10.000 €

DATA SHEET:

Download data sheet file (2010.01 kb)

PERMANENT MAGNET LDS SHAKER

CATALOG NAME: LDS V201

DESCRIPTION: An electrodynamic, permanent magnet shaker for fatigue and resonance testing, modal and structural analyses, and vibration screening of small components. Peak sine force ratings of 17.8 N (4 lbf) or up to 26.7 N (6 lbf), when forced-air cooled. CHARACTERISTICS LDS® V201 shakers are cost-effective, reliable and easy-to-operate. Their fabrication has been optimized to allow them to deliver superior peak forces and accelerations over a wide frequency range, from 5 to 13,000 Hz. Capable of imparting sine forces up to 26.7 N (6 lbf) when forced-air cooled and of reaching maximum accelerations of 136 g, they incorporate a moving armature that is both sturdy and lightweight to provide adequate support for test loads without diminishing force capability. Although cooling is not typically required for these shakers, provision is made for easy connection of a forced-air supply; this is only necessary when the input power is expected to exceed the specified figures. Because they are permanent magnet shakers, the V201 models do not need a field power supply. They can be driven by compact, quiet and energy-efficient amplifiers, such as the LDS® LPA100. They are compatible with LDS® COMETUSB™ and LASERUSB™ controllers, as well as with third-party vibration control systems. As standard, these palm-sized vibration generators come base-mounted but trunnion mounting is available upon request. Auxiliary suspension is also an option; for use when the mass of the test package exceeds suspension ratings, this feature increases payload capacity or allows the shaker to be vertically suspended from the test structure.

PRODUCER: Brüel & Kjær

PRODUCTION YEAR: 2021

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase) less than 5.001 €

DATA SHEET:

Download data sheet file (1136.56 kb)

Liniar power Amplifier

CATALOG NAME: LPA100-230V

DESCRIPTION: A range of economical amplifiers with outputs from 50 – 1000 W used to drive permanent-magnet and small electrodynamic shakers with force ratings from 8.9 N (2 lbf) to 489 N (110 lbf) for vibration testing and other applications. CHARACTERISTICS Power range from 154 VA – 1296 VA Frequency ranges from DC – 15 kHz Total harmonic distortion of less than 0.1% Signal-to-noise ratio greater than 95 dB Class B classification for amplifier efficiency Compact and efficient, these stand-alone units are designed for driving our permanent magnet shakers, as well as our low-force shakers, when operated with a separate LDS® FPS Field Power Supply. LDS linear power amplifiers offer low-noise, low-distortion performance and are available in three models, LPA100, LPA600 and LPA1000. USE SCENARIOS Driving LDS permanent magnet shakers V101, V201, V406, V450 and V455 Driving LDS low-force shakers V555, V650 and V721 Driving third-party shakers with force ratings of at least 8.9 N (2 lbf)

PRODUCER: Brüel & Kjær

PRODUCTION YEAR: 2021

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase) less than 5.001 €

DATA SHEET:

Download data sheet file (1136.56 kb)

Polarization Microscope with reflection and transmission modules

CATALOG NAME: Leica DM750 P

DESCRIPTION: Features & Benefits: Large 178 mm diameter stage for easy specimen placement and viewing of calibrations Leica EZLite™ LED illumination saves the cost of replacement lamps and provides a cool white light for over 20 years of average use EZStore™ design with Handle and cord wrap allows easy carrying, easy lifting, and protection against microscope component damage 4position individually centerable nosepiece for exact centration of each objective to the stage rotation axis, for quick and easy change of magnification. DM 750P LED Stand with 4 Position centerable nosepiece, KoehlerIllumination, Polarizer for Tranmsitted Light, Add on lens for Condensers, Universal Power Supply plus USB Power with integrated connector, circular rotating stage with graduations and adjustable brake, LED illumination, built in handle and cord wrap, objective centering tools Obj. : HI PLAN 4x/0.10 POL /,12,1 HI PLAN 10x/0.25 POL HI PLAN 20x/0.40 POL HI PLAN 40x/0.65 POL HI PLAN 100x/1.25 OIL POL Pol Abbe Condenser 0.85 Reflected Light Axis w/slider Pol Kit ICC50 W Camera Module Leica Camera LAS Hardware USB Dongle LAS Interactive Measurement Module

PRODUCER: Leica

PRODUCTION YEAR: 2021

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase) 10.001 € – 50.000 €

DATA SHEET:

Download data sheet file (4473.31 kb)

Oscilloscope digital high definition 2x200 MHz

CATALOG NAME: Lecroy

DESCRIPTION:

PRODUCER: Teledyne LeCroy

PRODUCTION YEAR: 21

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase) 10.001 € – 50.000 €

DATA SHEET:

Split-Type Tube Furnaces for Horizontal or Vertical Operation up to 1300 °C

CATALOG NAME: RSH50/250/13 cod RS152L3AN

DESCRIPTION: These tube furnaces can be used for horizontal (RSH) or vertical (RSV) operation. The split-type design makes it easy to change the working tube. It allows for a comfortable exchange of various working tubes (e.g. working tubes made of different materials). Using a wide range of accessories, these professional tube furnaces can be optimally tailored for your process. By adding different gas supply packages, you can work in a protective gas atmosphere, with gases or in a vacuum. In addition to the convenient standard controllers, modern PLC controls can also be used to control the process. Standard Equipment Tmax 1100 °C or 1300 °C Single-zoned design Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature Exclusive use of insulation materials without categorization according to EC Regulation No. 1272/2008 (CLP) RSV models with frame for vertical operation Split-type design for simple insertion of the working tube (opening temperature < 180 °C) Ceramic working tube C 530 including two fiber plugs for operation under air Thermocouple type N (1100 °C) or type S (1300 °C) Solid state relays provide for lownoise operation Heating elements on support tubes provide for free radiation RSH: switchgear and control unit integrated in furnace housing RSV: switchgear and control unit separate from furnace in own wall or standing cabinet Defined application within the constraints of the operating instructions NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive Controller B550

PRODUCER: Nabertherm

PRODUCTION YEAR: 2022

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase) 5.001 € - 10.000 €

DATA SHEET:

Download data sheet file (9600.89 kb)

Pellet Press uniaxial

CATALOG NAME: Model 4350 CE.L

DESCRIPTION: Evacuable 13mm Pellet Die Set (catalog #3619) Evacuable 25mm Pellet Die Set (catalog #4369) Manually operated Heavy-duty extended base frame with die storage cavity Rugged construction to eliminate deflection Extended daylight opening and stroke for procedures requiring high compaction ratios Clamping force 12 tons Daylight opening 0" – 5.5" Stroke 5-1/8” Fully enclosed hydraulic unit Two (2) fully threaded columns 3.5” round top platen 4” round bottom work area (black oxide coated for corrosion resistance) Front mounted (0-24,000 lb) Analog pressure gauge (digital gauge also available) Front-mounted pump for easy application of the full tonnage Special features, including: Polycarbonate safety shield with latch Upper platen with concentric circles for die alignment (Black oxide coated for corrosion resistance) Evacuation port for connection to an existing vacuum source Paint: Carver gray two-tone Removable pump handle Dimensions: 10.25”L-R x 15”F-B x 23”H (uncrated) Weight: 115 pounds (uncrated Evacuable 13mm Pellet Die Set (catalog #3619) Evacuable 20mm Pellet Die Set Evacuable 25mm Pellet Die Set (catalog #4369) https://www.carverpress.com/products/benchtop-manual/bm-pellet/4350-L

PRODUCER: CARVER

PRODUCTION YEAR: 2021

COMMISSIONING DATE: 29/11/2022

PRICE RANGE (at the time of purchase) 10.001 € – 50.000 €

DATA SHEET:

3D PRINTER SL1S SPEED

CATALOG NAME: SL1S SPEED

DESCRIPTION: Display type Monochrome LCD with high-performance lens system LCD resolution 5.96'', 2560×1620p LCD lifespan / warranty 2000 hours Print volume size 127×80×150 mm Layer exposure time 1.3 - 2.4 seconds depending on material and layer height Tilt time 3 seconds Supported layer heights 0.025-0.1 mm Minimal layer height 0.01 mm Supported materials UV sensitive liquid resin (405nm), long-exposure materials supported Connectivity: USB, Wi-Fi, LAN SL1S printer box dimensions: 320×450×500 mm (X×Y×Z) SL1S dimensions: 8.8×9.3×15.7 in / 225x237x400 mm (X×Y×Z) SL1S energy consumption while printing: ~100W (±5W) https://www.prusa3d.com/product/original-prusa-sl1s-speed-3d-printer/

PRODUCER: PRUSA

PRODUCTION YEAR: 2022

COMMISSIONING DATE: 31/07/2023

PRICE RANGE (at the time of purchase) less than 5.001 €

DATA SHEET:

Set up experimental for harvesting energy performances

CATALOG NAME: laboratory-made

DESCRIPTION: The piezoelectric energy harvesting performance was measured by using an experimental set-up device based on the vibrational system LDS V201, LPA100-230V amplifier (Brüel & Kjær), signal generator Tektronix AFG3051C, Oscilloscop Teledyne LeCroy high definition (2x200MHz), a circuit for rectification and energy collection, and a computer with LabView program for data acquisition. The circuit for rectification is a full rectifying bridge circuit with four BAT43 CD0000766 diodes (STMicroelectronics) and a capacitor C of 1.5 µF.

PRODUCER:

PRODUCTION YEAR: 2022

COMMISSIONING DATE:

PRICE RANGE (at the time of purchase) less than 5.001 €

DATA SHEET: